When you make the shift to vapor smoking electronic cigarettes, you can purchase pre-filled e cig cartridges or refill your cartridges with e liquid. By making the choice to refill your own electronic cigarette cartridges instead of throwing them away, you can save a fair bit of money. To refill your e cig cartridges, you will need to either buy e liquid or make your own e juice to use to fill the cartridges.
What Tools Do You Need to Refill Electronic Cigarette Cartridges?
The best tool to use for refilling electronic cigarette cartridges and to avoid getting e liquid all over the place is a syringe. By using a syringe with a need, you can disperse the e liquid evenly along the cartridge filler. A syringe also makes it easier for you to extract e liquid from a bottle that is less than half full. When you purchase a syringe to use for your e liquid, buying ones that are used for refilling ink cartridges of your printer can also be used for your e liquid. They are wide and have a blunt needle which will lessen the chances of sticking yourself with the syringe needle.
How to Refill E Cig Cartridges with a Syringe
Step 1 – Find a place in your home where your children won’t be able to disturb you while refilling your e cig cartridges. This will help protect them from the nicotine dangers associated with e liquid.
Step 2 – Ensure the e cig cartridge filler is visible before starting. Some two-piece cartridge designs will have an outer and inner cartridge that actually has the cartridge filler. For these two-piece designs, you may have to use a paper clip to push the inside cartridge out until its visible.
Step 3 – Use your syringe and remove e liquid from your bottle. Then, insert the syringe needle into the middle of your e cig cartridge filler until you are near the bottom of the cartridge. If you have a two-piece e cig design where the atomizer is contained in the cartridge, you will want to make sure you avoid damaging the atomizer and read our specific GreenSmoke cartridge filling instructions.
Step 4 – Depress your syringe plunger slowly while moving the needle. The goal is to ensure an even fill of your e cig cartridge without overfilling. If you start to see e juice pooling at the top of the cartridge, you will want to remove the excess into your syringe.
Step 5 – Once the cartridge is filled, cap it for later use or install on your electronic cigarette.
Step 6 – Put any left-over e liquid back into your e juice bottle. You can also put the cap on the syringe and let it remain in the syringe to top off additional cartridges.
Step 7 – Wash your syringe by filling it with fresh water and flushing the syringe several times.